PPE Storage Cabinets for Organized Hospital Supplies

PPE storage cabinets for hospitals provide wall-mounted organization for gowns, gloves, and masks at the point of use. Plan your cabinet layout around supply package sizes, wall placement, restocking needs, and staff access with help from our design team.

Get Custom Design

Wall-mounted beige cabinet with two doors in a hospital hallway.

What Are PPE Storage Cabinets for Hospitals?

PPE storage cabinets for hospitals are wall-mounted cabinets that organize personal protective equipment such as gowns, gloves, and masks in dedicated holders. These units keep common PPE supplies visible and accessible near clinical work areas without using floor or counter space. They are designed for storage and organization only; they do not provide UV treatment, dispensing, or inventory-management functions.

Planning Cabinet Size Around PPE Packages and Wall Space

Cabinet sizing starts with the actual gown, glove, and mask packages your facility uses. Confirm package dimensions, the quantity of each PPE type to store, available wall space, staff reach ranges, and clearance for doors or fold-down staging before finalizing the layout.

Dimensions and orientation of gown, glove, and mask packages.
Available wall width, height, and user reach range.
Clearance for doors, fold-down staging surfaces, nearby counters, and adjacent equipment.
Restocking access at the intended point of use.

A wall-mounted cabinet with open double doors reveals multiple metal holders inside, designed for organized storage.

Hallway with a wall-mounted closed PPE cabinet and new ribbed light gray wall finish.

Cabinet Features, Holders, Doors, and Staging Options

This medical PPE storage cabinet features a three-quarter-inch HDPE cabinet body, a PVC slatwall back panel, Thermofoil doors, and stainless holders for gowns, gloves, and masks. The slatwall back panel supports flexible holder placement, while an optional fold-down staging surface can provide a temporary work area for restocking or preparing PPE.

Holder positions should match the actual PPE package sizes used in each department.
Door and staging choices should be checked against nearby counters, equipment, and walking paths.
Material selections should be reviewed against facility-approved cleaning practices.

Where Hospital PPE Cabinets Fit Into Daily Workflows

Hospital PPE cabinets can support nursing units, emergency departments, outpatient clinics, laboratories, and clean supply areas where staff need organized access to gowns, gloves, and masks. Placement should be planned around how each team retrieves supplies, how restocking is handled, and where wall-mounted storage will avoid conflicts with clinical work areas.

A white wall-mounted cabinet with open doors and multiple interior metal holders is shown in a neutral room.

Closed wall-mounted PPE cabinet in hospital hallway with ribbed light gray wall, metal table, and carton stack.

Planning a PPE Cabinet Quote

Southwest Solutions Group offers design and installation services for medical PPE storage cabinets, including free consultations before the design process begins. To prepare for a quote, document the intended wall locations and confirm the supply packages, holder layout, doors, staging, and cleaning compatibility your hospital needs.

Photos or drawings of proposed wall locations.
Gown, glove, and mask package dimensions.
Preferred holder layout and quantity needs.
Door, staging, and cleaning compatibility requirements.

A built-in cabinet with two doors and a lower compartment mounted on a hospital hallway wall. — Organize gowns, gloves, and masks near staff work areas.

In hospital nursing units, wall-mounted PPE cabinets give nurses and support staff a fixed location for gowns, gloves, and masks near routine care areas. The cabinet helps keep supplies separated by PPE type and easier to check during shift changes and restocking rounds.

Dedicated holders separate gowns, gloves, and masks.
Wall mounting preserves floor space in busy corridors or work zones.
Visible storage helps staff check supply levels during routine restocking.

Hospital PPE cabinet near nursing station mounted above a protective handrail — Keep PPE organized in high-traffic emergency department areas.

Emergency department staff need PPE supplies positioned where teams can retrieve them quickly without searching through open shelves or counters. A wall-mounted PPE cabinet can be placed near preparation or supply areas, with holder placement planned around the PPE packages used most often in that space.

If your project also includes broader emergency room storage planning, review the O'Neil VA Medical Center ER storage case study for an example of healthcare storage planning in an active emergency department.

Holder configuration supports quick identification of PPE types.
Optional fold-down staging can help staff handle packages during restocking.
Door and staging clearance should be reviewed for high-traffic ED locations.

PPE cabinet beside patient room entrance for storing protective equipment near the point of care — Add fixed PPE storage where clinic space is limited.

Outpatient clinics often have limited counter and floor space for PPE supplies. A wall-mounted PPE storage cabinet gives clinic staff a dedicated location for gowns, gloves, and masks while keeping work surfaces available for patient care tasks and supplies.

Wall mounting keeps PPE off counters and floors.
Holder layout can be planned around the clinic’s actual supply packages.
Mounting height should be coordinated with staff reach requirements.

PPE storage cabinet outside patient room with recessed handles and enclosed compartments — Organize PPE for staff in laboratory support spaces.

Hospital laboratory support zones and prep areas often need PPE close to staff work locations without taking over bench space. A wall-mounted PPE cabinet can be configured around the actual gown, glove, and mask packages used by the lab team.

Holder placement can be matched to laboratory PPE package sizes.
Wall locations should be reviewed so the cabinet does not interfere with benches or adjacent equipment.
Upper doors can provide enclosed storage within the cabinet layout.

Wall mounted PPE cabinet in hospital corridor beside patient room doors — Support PPE restocking in supply rooms and corridors.

Restocking teams need consistent, visible locations for PPE supplies across hospital departments. Wall-mounted PPE cabinets can be placed in clean supply rooms or corridor supply points so staff can replenish gowns, gloves, and masks in organized holders.

Consistent holder layouts can make restocking more predictable across departments.
Placement should allow restocking access without blocking nearby work areas.
Package quantities should be confirmed so each holder supports the intended supply level.

Planning Your Hospital PPE Cabinet

Use this guide to confirm the main planning decisions for a wall-mounted hospital PPE cabinet. Final recommendations should be based on package dimensions, wall placement, holder layout, and facility cleaning requirements.

Planning Decision	Why It Matters	What to Confirm
PPE Package Fit	Departments that use specific gown, glove, and mask package sizes.	Confirm package dimensions and orientation before selecting holder positions.
Holder Layout	Facilities that need organized access to multiple PPE types at one point of use.	Plan the stainless gown, glove, and mask holders around the actual supply mix for each location.
Doors and Staging	Locations where supplies should be enclosed or where staff need a temporary surface for restocking.	Review Thermofoil door clearance and whether a fold-down staging surface fits the available space.
Wall Placement Review	Projects where cabinet placement must work with staff reach, nearby equipment, and cleaning practices.	Confirm wall space, mounting location, traffic clearance, and facility-approved cleaning compatibility.

Southwest Solutions Near You

With 7 offices in Texas, Oklahoma, Kansas and Colorado, plus teams covering every major metro area nationwide, Southwest Solutions Group provides expert sales, design, installation, and maintenance support for hospital PPE storage cabinets wherever you need it.

PPE Storage Cabinets for Hospitals Service Areas

Texas

Offices in Austin, Dallas, Houston & San Antonio w/ sales, design, and installation coverage statewide

Dallas
Austin
Houston
San Antonio
Waco
Tyler
Amarillo
Lubbock
El Paso
Ft Worth
Corpus Christi
Midland

Oklahoma

Office in Edmond w/ sales, design, and installation coverage statewide

Oklahoma City
Tulsa
Norman
Lawton
Enid
Stillwater
McAlester
Muskogee
Guymon

Kansas

Office in Lenexa w/ sales, design, and installation coverage statewide

Wichita
Overland Park
Topeka
Kansas City
Lawrence
Manhattan
Salina
Hays
Dodge City
Garden City

Colorado

Office in Englewood w/ sales, design, and installation coverage statewide

Denver
Colorado Springs
Fort Collins
Grand Junction
Pueblo
Durango
Alamosa
Steamboat Springs
Greeley

Alabama