Comprehensive CO₂ Solutions Integrated with Your Facility | SSG Horticulture

Comprehensive CO₂ Solutions Integrated with Your Facility

Coordinate bulk CO₂ supply, precise room-level delivery, and IFC-compliant life-safety systems across commercial cannabis cultivation facilities. SSG Horticulture helps plan the complete path from tank sizing and delivery controls to monitoring, notification, and automatic shutoff.

Explore CO₂ Systems Request a Free Design and Proposal CO₂ Delivery CO₂ Safety

SupplySize for Facility Demand

Plan bulk storage around room count, operating schedules, and anticipated consumption.

DeliveryControl Room Distribution

Regulate and route CO₂ to cultivation areas through a coordinated delivery system.

SafetyIFC-Compliant Products

Use detection, notification, control, and shutoff products designed to meet IFC requirements.

IntegrationCoordinate the Whole Facility

Align equipment, controls, zones, piping routes, and response logic before installation.

Product configurations

Plan delivery and life safety as two parts of one CO₂ system.

CO₂ Delivery supports cannabis production through supply and controlled room distribution. CO₂ Safety protects occupied spaces through monitoring, alarms, controls, and automatic isolation.

CO₂ Delivery

Supply, regulate, and distribute.

Move CO₂ from appropriately sized bulk storage to the cultivation rooms that need it.

Bulk commercial CO₂ supply tanks in multiple sizes

Facility supply

Bulk CO₂ Supply Tanks

Bulk tanks form the supply side of the delivery system. Expected usage is calculated and the tank is sized to support reliable delivery across the cultivation rooms.

What it doesStores the facility's liquid CO₂ supply.

Use whenThe operation needs dependable, high-volume CO₂ for multiple rooms or production zones.

Planning detailsFacility usage, refill strategy, tank location, delivery access, piping routes, and room demand.

InstallationAvailable tank solutions can avoid cranes, electricity, and large structural pads.

Watch forTank capacity should be based on actual operating demand rather than a generic facility-size assumption.

Plan Bulk Supply

Facility distribution

CO₂ Distribution Kit

The distribution kit creates the delivery path between the bulk supply and the cultivation rooms. Its components route CO₂ through the facility so each room can receive controlled enrichment.

What it doesCreates the facility distribution network between bulk supply and room-level delivery.

Where it fitsBetween the exterior or central supply equipment and the cultivation-room delivery equipment.

ControlsCoordinates with the facility delivery strategy and cultivation control platform.

Planning detailsRoom count, piping routes, delivery zones, flow requirements, controls, and expansion plans.

Watch forDistribution capacity and routing should reflect simultaneous demand and future rooms.

Plan Distribution

Room delivery control

CO₂ Boost Delivery System

The CO₂ Boost system provides precise, adjustable distribution into the grow environment. It can be tuned around room demand and integrated with the cultivation control system.

What it doesControls and fine-tunes CO₂ delivery into cultivation rooms.

Where it fitsAt the controlled delivery stage between the facility distribution network and grow environment.

ControlsIntegrates with the cultivation control platform and room operating schedule.

Planning detailsRoom size, target delivery, control interface, flow requirement, access, and serviceability.

Watch forRoom demand and system capacity should be evaluated together rather than sizing each room in isolation.

CO₂ Safety

Detect, alert, and isolate.

Monitor occupied spaces and coordinate the appropriate response when CO₂ reaches programmed thresholds.

Detection

CO₂Safe Monitoring

CO₂ is heavier than air and can collect near the floor. CO₂Safe monitors concentration in the occupied environment and reports conditions to the connected safety controls.

What it doesDetects increasing CO₂ concentration in monitored areas.

Use whenCO₂ is stored, piped, or used inside occupied commercial facilities.

Planning detailsRoom coverage, mounting height, calibration access, setpoints, and connected devices.

System roleInitiates notification and shutoff responses through the connected control panel.

StandardPart of an IFC-compliant CO₂ safety product package.

Safety control

CO₂ Connect Control

CO₂ Connect centralizes monitoring inputs and coordinates notification and isolation functions as part of the facility's life-safety strategy.

What it doesReceives monitoring inputs and directs the programmed safety response.

Use whenMultiple sensors, alarms, or shutoff devices need coordinated control.

Planning detailsZones, connected devices, power, interfaces, alarm states, and reset procedure.

System roleConnects detection to occupant notification and source isolation.

StandardSupports an IFC-compliant CO₂ safety system.

CO₂ doorway audible and visual alarm devices

Doorway notification

CO₂ Doorway Alarms

CO₂ Doorway provides visual and audible notification at room approaches so occupants can recognize an alarm condition before entering an affected space.

What it doesWarns occupants when a monitored CO₂ threshold is reached.

Use whenOccupied rooms and approach points require clear local notification.

Planning detailsVisibility, audibility, room entry points, occupied areas, and alarm messaging.

System roleCommunicates the control panel's alarm state to people in and around the affected zone.

StandardNotification devices are included in the IFC-compliant product strategy.

Room isolation

Room Shutoff Valves

Room shutoff valves stop CO₂ flow to an individual cultivation space when its connected safety system reaches a programmed response condition.

What it doesIsolates the affected room without automatically interrupting every delivery zone.

Use whenFacilities need room-level separation and targeted emergency response.

Planning detailsRoom boundaries, valve placement, normal state, controls, manual reset, and maintenance access.

System roleProvides local source control after a room sensor and panel initiate the response.

StandardDesigned as part of an IFC-compliant CO₂ safety system.

Automatic main-facility CO₂ shutoff valve

Facility isolation

Facility Shutoff Valves

Facility shutoff valves interrupt the primary CO₂ supply when the defined safety response requires isolation at the source.

What it doesStops CO₂ flow from the main supply into the facility distribution system.

Use whenThe response plan requires central isolation in addition to room-level control.

Planning detailsMain supply location, valve state, system logic, emergency access, reset authority, and service clearance.

System roleProvides the final facility-wide source-control action after detection and panel response.

StandardDesigned as part of an IFC-compliant CO₂ safety system.

Plan CO₂ Safety

System requirements

CO₂ equipment should be selected around actual facility demand.

Final sizes, quantities, zones, and interfaces are determined through project-specific planning.

Supply and usage

Room volume, crop schedule, target operation, simultaneous demand, delivery frequency, and reserve capacity.

Distribution and controls

Piping routes, distribution-kit capacity, CO₂ Boost requirements, environmental controls, operating schedule, and expansion plans.

Planning category

Information reviewed during system design

AreaPrimary inputsOutcome

SupplyUsage and refill planTank capacity

DeliveryRooms and controlsDistribution plan

DetectionCoverage and setpointsSensor plan

ResponseAlarms and isolationSafety sequence

Final equipment selection is based on facility-specific operating requirements and the complete sequence of operation.

Eight-product system sequence

From bulk supply to emergency source isolation.

The first three products deliver CO₂ to the cannabis rooms. The next five detect conditions, coordinate the response, notify occupants, and stop flow when required.

Bulk CO₂ Supply Tanks

Store liquid CO₂ sized around cannabis facility demand and refill strategy.

CO₂ Distribution Kit

Create the facility delivery network between bulk supply and cultivation rooms.

CO₂ Boost

Fine-tune controlled delivery into flower, veg, or production rooms.

CO₂Safe

Monitor concentration where CO₂ can collect inside occupied spaces.

CO₂ Connect

Receive monitoring inputs and coordinate the programmed safety response.

CO₂ Doorway

Provide visual and audible notification at room approaches and entries.

Room Shutoff Valves

Stop CO₂ flow to an affected cultivation room or safety zone.

Facility Shutoff Valves

Isolate the main CO₂ supply when the response requires facility-wide shutoff.

Project input checklist

What SSG needs to plan your cannabis CO₂ system.

The right system starts with operating requirements, facility conditions, and a clear response sequence.

These inputs help coordinate supply, distribution, monitoring, notification, and isolation for new facilities, expansions, and existing-room retrofits.

Facility drawings

Room count and sizes

Canopy plan

Operating schedule

Expected usage

Existing equipment

Tank location

Refill access

Piping routes

Control platform

Delivery zones

Sensor coverage

Alarm setpoints

Room isolation

New build or retrofit

Where We Work

Supporting Cannabis CO₂ Projects Across Regions and Facility Stages

SSG can support cannabis cultivation operators through new builds, expansions, retrofits, existing-room upgrades, and complete CO₂ delivery and safety system projects across a broad national service footprint.

Horticulture Coverage

Southwest Solutions Near You

Explore office locations and supported service markets across the U.S. for cannabis cultivation facilities and commercial CO₂ system projects.

Southwest Solutions Service Areas

Texas

Offices in Austin, Dallas, Houston & San Antonio w/ sales, design, and installation coverage statewide

Dallas
Austin
Houston
San Antonio
Waco
Tyler
Amarillo
Lubbock
El Paso
Ft Worth
Corpus Christi
Midland

Oklahoma

Office in Edmond w/ sales, design, and installation coverage statewide

Oklahoma City
Tulsa
Norman
Lawton
Enid
Stillwater
McAlester
Muskogee

Kansas

Office in Lenexa w/ sales, design, and installation coverage statewide

Wichita
Overland Park
Topeka
Kansas City
Lawrence
Manhattan
Salina
Hays
Dodge City
Garden City

Colorado

Office in Englewood w/ sales, design, and installation coverage statewide

Denver
Colorado Springs
Fort Collins
Grand Junction
Pueblo
Durango
Alamosa
Steamboat Springs

Alabama