Vinyl Roll Rotating Carousel

How an automated vertical roll carousel system for vinyl works

An automated vertical roll carousel system for storing, displaying and cutting vinyl works in much the same way you would expect if you were using it to store paint cans or print cylinders. This is because they all use the same basic operation, a push button. And, when it is engaged, carriers for each rotate up and down to deliver material at an ergonomic height compatible with its operator. It contributes to the conservation of floor space by utilizing space from overhead, while also allowing maximum storage within a limited footprint to be provided for. Many systems interface with cutting equipment much like an automated vertical roll carousel system for storing, displaying and cutting vinyl. Click here to learn more about motorized vertical carousels.

Six steps to operating automated vertical roll carousel cutting bar

There is, however, one feature the automated vertical roll carousel system for storing, displaying and cutting vinyl has that the others do not. An integrated cutting bar with counter and re-roller. The measuring, cutting and re-rolling of prepared vinyl directly from the system is allowed to be handled by a single operator as a result. The cutting bar simply could not allow any of this to happen, without the inclusion of these features:

Approved and certified counter
Crank operated bi-directional cutter
Cut length support cradlee
Easy to operate controls
Patented hinge arm loading device
Patented re-roller bar system

It is safe and easy to use. All you need to do to work the cutting bar is follow these six steps:

Set the vinyl into position by pulling it across the cutting bar, then clip the easy to use re-roller bar
Lower the counter assembly next, then set the counter to zero
Once the counter is set, turn the crank to roll and measure the length of vinyl desired
After it has been dispensed, lower the hold-down clamps located at both ends of the cutting surface
Turn the cutter crank, un-clamp the vinyl and secure the dispensed roll with tape or shrink wrap when you’re ready to cut
Swinging the self storage roll cradles in place, dropping the roll onto the cradles and removing the re-roller bar from the end of the vinyl will allow for safe and efficient removal of dispensed rolls

Added details about an automated vertical roll carousel

Here are just a few added details to be aware of, when talking about this automated vertical roll carousel system for storing, displaying and cutting vinyl:

Standard systems have the capacity to accommodate anywhere from 12 to 40 rolls of vinyl
With support from its integrated cutting/measuring/re-rolling system, it lends itself to improving productivity and service
A security keypad is available for the system, if wanting to prevent unauthorized use
Increased workplace safety and a reduction in back injuries are the result of its ergonomic design
Material dollies are available for roll transport
The system, itself, can also be built-to-fit specifications

Read more articles on other methods for storing heavy, hard to handle industrial material.

Contact us for automated vertical roll carousel system

Southwest Solutions Group® provides design and installation services of an automated vertical roll carousel system for storing, displaying and cutting vinyl. Free consultations are available to determine you and your business’s exact needs before the design process begins. To learn more or to speak with a storage specialist, call us at 1-800-803-1083 or send us a message today.