toll free: (800) 803-1083

How an automated vertical roll carousel system for vinyl works

automated vertical roll carouselAn automated vertical roll carousel system for storing, displaying and cutting vinyl works in much the same way you would expect if you were using it to store paint cans or print cylinders. This is because they all use the same basic operation, a push button. And, when it is engaged, carriers for each rotate up and down to deliver material at an ergonomic height compatible with its operator. It contributes to the conservation of floor space by utilizing space from overhead, while also allowing maximum storage within a limited footprint to be provided for. Many systems interface with cutting equipment much like an automated vertical roll carousel system for storing, displaying and cutting vinyl. (Watch video)

Six steps to operating automated vertical roll carousel cutting bar

There is, however, one feature the automated vertical roll carousel system for storing, displaying and cutting vinyl has that the others do not. An integrated cutting bar with counter and re-roller. The measuring, cutting and re-rolling of prepared vinyl directly from the system is allowed to be handled by a single operator as a result. The cutting bar simply could not allow any of this to happen, without the inclusion of these features:

  • Approved and certified counter
  • Crank operated bi-directional cutter
  • Cut length support cradlee
  • Easy to operate controls
  • Patented hinge arm loading device
  • Patented re-roller bar system

It is safe and easy to use. All you need to do to work the cutting bar is follow these six steps:

  1. Set the vinyl into position by pulling it across the cutting bar, then clip the easy to use re-roller bar
  2. Lower the counter assembly next, then set the counter to zero
  3. Once the counter is set, turn the crank to roll and measure the length of vinyl desired
  4. After it has been dispensed, lower the hold-down clamps located at both ends of the cutting surface
  5. Turn the cutter crank, un-clamp the vinyl and secure the dispensed roll with tape or shrink wrap when you're ready to cut
  6. Swinging the self storage roll cradles in place, dropping the roll onto the cradles and removing the re-roller bar from the end of the vinyl will allow for safe and efficient removal of dispensed rolls

Added details about an automated vertical roll carousel

system for storing displaying and cutting vinylHere are just a few added details to be aware of, when talking about this automated vertical roll carousel system for storing, displaying and cutting vinyl:

  • Standard systems have the capacity to accommodate anywhere from 12 to 40 rolls of vinyl
  • With support from its integrated cutting/measuring/re-rolling system, it lends itself to improving productivity and service
  • A security keypad is available for the system, if wanting to prevent unauthorized use
  • Increased workplace safety and a reduction in back injuries are the result of its ergonomic design
  • Material dollies are available for roll transport
  • The system, itself, can also be built-to-fit specifications

Read more articles on other methods for storing heavy, hard to handle industrial material.

Contact us for automated vertical roll carousel system

Southwest Solutions Group® provides design and installation services of an automated vertical roll carousel system for storing, displaying and cutting vinyl. Free consultations are available to determine you and your business's exact needs before the design process begins. To learn more or to speak with a storage specialist, call us at 1-800-803-1083 or send us a message today.

Resources

View Video

No videos available at this time

Some of Our Clients

testimonies from clients business efficiency systems maximizing floorspace enhancing workflow productivity